Description
Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.
REN-420083 : Renusol Cross rail connector
R75,00
Part No: REN-420083.
Technical Data:
Weight:0.07 kg
The Renusol Cross-Rail Connector is used is pairs to attach perpendicular lengths of Renusol rail, or rail to TriSole frames.
A pair of Cross-Rail Connector are attached either side of the upper rail.
The upper rail should always be of 50mm x 37mm type because it has a small ridge along a third face to allow a connector to clamp on, whereas the 41 x 35 does not. Use any of the following rail partnos: (Silver) REN-500502, REN-500505 or (black) REN-400502-B, REN-400505-B.
Technical Data:
Dimensions: 35x35x65
Weight: 0.066kg
Set: complete pre-assembled set
Material: Aluminium; Corrosion resistant steel
Certification: TUV ID:48970; MCS012 IK0197
Useable with: VS+ mounting rail 50×37; TS+
Maximum Torque: 12,00 Nm
Driver: Hexagon socket 5mm
Download datasheet here : Renusol_VS__system_datasheet
Download manual : VarioSole Installation Instructions (1)
Renusol mounting equipment must not be used with mounting equipment from other suppliers. Doing so would inevitably void the warranty of the mounting system.
12 in stock (can be backordered)
