Description
Features : 8000 CYCLES BATTERY LIFE AND 95% DOD ! – SUPER BATTERY
- Low voltage LiFeP04 solar battery developed by Pylontech with their own Lithium Ion Phosphate cells to ensure superior quality and lifespan .
- Modular design for ease of expansion.
- 95% Depth of Discharge (DoD).
- Usable capacity : 4.8kWh.
- Parallel capability of up to 16 units. ( additional batteries >16 to can be connected using the Pylontech LV battery comms hub available for purchase under our “inverters” section of our online store
- If connecting >16 via LV hub using CAN : Max capacity = 1.92 MWh = 400 batteries .
- If connecting >16 via LV hub using RS485 : Max capacity = 384 kWh = 80 batteries .
- Intelligent BMS protecting battery cells.
- An amazing battery life cycle > 8000 Cycles.
- Battey to inverter comms : RS485 or CAN .
- Comes with 7-year standard warranty which is extendable to 10-years upon registration.
- Installation flexibility (Rack mount or Wall-mount)
- Weight: 39.7 kg
- Battery Type:Lithium Ion
- Battery Voltage:48 V DC
- connect battery/batteries to upstream windows /mac or linux computer /smart phone for local /remote monitoring of your Power System via Watch Power program/app – see further down this page to download and setup for free .
download notes on adding additional batteries to battery bank here :Application Note – Adding Lithium-Ion batteries to an existing battery bank. pdf
download notes on firmware upgrade here : Application Note – Pylontech upgrading firmware
download Kodak inverter settings here : Kodak inverter user settings guide
download firmware upgrade for Kodak inverters here : Pylontech new chipset update
download manual with integrated datasheet here : Installation Manual-US5000
download Lv hub installation manual here : LV-Hub Communication HUB Product Manual
download warranty here : Pylontech_product_warranty_US serie-EU_2020 Oct
download inverter compatibilty list here : Pylontech Compatible List V2.15 ESS
- Warning ! ” Your LifePo4 lithium batteries and inverters you buy from us must be the ones we have specified that are compatible with each other .This keeps your warranties intact .
- Our compatible inverters we sell for this battery : All our , Growatt , Sacolar , Deye , Sunsynk , Luxpower , Victron , Axpert , Voltronic , Solis and Atess inverters.
-
( Note : Inverter/battery settings for Sacolar are identical to Growatt
- Note : Luxpower inverters have dual mppts (solar chargers ) they put out 110A charge when you fully load your roof with its max 6400W of solar panel power , 3200W / solar mppt therefore you will require at least 2 of these Pylontech batteries to safely handle its power .
- Please also refer to the Pylontech battery Compatibility list further below for the correct BMS battery to inverter communication via the supplied network cable – it will either be CAN or RS485 .
Please note : The following inverters we sell ( Axpert and Voltronic ) for this battery enables your power system to be monitored from your LAN or from across the internet via your inveters wifi from windows /mac or linux computer /android/apple device /tablett via the free Watch Power program / app – see further down this page to download and setup for free .
- Please note : Our Growatt , Sacolar , Deye , Sunsynk , Luxpower , Victron and Solis inverters we sell for this battery are also monitored via their wifi and have their own software to do this – Please refer to your inverter manual for setup instructions .
.
Warning ! ” Make sure you receive the correct battery to inverter BMS network cable that goes between your inverter and battery from our manufacturer and that it is correctly crimped on both ends – its colour coded according to your battery / and or inverters manual/s below – In addition ; make sure that it is plugged into the correct BMS port on the inverter and battery .This allows the inverter to safely charge/discharge your batteries and also keeps your warranties intact
Please note !
Dependent on the number of battery /ies and inverter/s you are going to use – see your inverter user manual and/or inverter specifications , you may have a large amount of DC current coming from and running into your batteries – you may have to connect your + and – battery/ies leads and your inverter/s + and – battery leads directly to high current copper bus bars which we supply as a bus bar cabinet with integrated copper bus bars which are available for purchase under our circuit breakers and fuses section in our online store .
FREE ENERGY GENERATION : This product can be connected to our wind turbines we sell and is as an alternative FREE WAY to generate energy as apposed to expensive generators which require costly fossil fuel that fluctuates and increases in price , are noisy and create fumes .
WIND TURBINES GENERATES POWER AT NIGHT and extends the life of your batteries significantly .
If you require generators for your solar OFF GRID SYSTEM , please see our list of generators we do sell for OFF GRID solar integration listed under our inverters section in our online store .
Installer notes checklist :
1 .Consult both the inverter and battery manuals for the following :
2 . Both the inverter and battery must be running the latest firmware . Update each device if required so that they are both running the latest firmware .
2.. Confirm that the BMS cable is correctly crimped and not damaged in any way with the correct colour coded pin layouts on both ends .
3. The BMS cable is plugged into the correct bms port on the inverter and battery .
One end of the cable must plug into either the CAN BMS or RS485 BMS port on the inverter and the other end of the cable must plug into either the CAN BMS or RS485 port of the battery depending on if the 2 devices communicate via CAN or RS485 – they will both use CAN or they both will use RS485 to communicate with each other only – this ensures that the correct charge /discharge levels and parameters are applied ensuring that these levels are kept at the prescribed safe levels as per design and that your warranties are not voided .
PLEASE NOTE :
All power system/s and or related products , including our State of the Art Geyser Wise heating systems we sell must conform to all local wiring regulations and standards. Genesis Power Systems Pty Ltd will not be held liable for any product damage and /or failure that could arise due to systems that have not been installed in accordance with the Manufacturers prescribed install method/s .
