Description
Features and specifications :
- Output power = 1000w .
- 1 x High quality Wind turbine (aluminum) with 1 x advanced lithium charge controller unit employing built in electronic circuit wind speed and wind direction breaking technology .
Please note :
Save bird life this way please – Spray paint every alternate turbine blade matt black on turbine before installation so that birds can see the turbines – this is confirmed extremely effective from various ongoing studies around the planet .
Approx delivery time on these product are approx 10- 21 days with tracking .
Suggested mounting options .
A . Mounted against a wall of a free standing structure on your property I.E : Garage that is not part of the home using a 1m stainless steel mounting pole . Use 10mm stainless steel threaded bar , nuts and chemical anchors to secure mount pole to structure .
or
B : Mounted against a free standing ground cemented 5m wooden tar pole ( wooden pole diam+- 150 mm ) cemented into the ground at a depth of approx 1m on your property at a location that is exposed to the prevailing seasonal wind directions .
Note : Obtain the following items from your local D.I.Y/electrical/store for installation of your turbine :
- 1m stainless steel mounting pole . ( drill 2 holes near base of pole for securing stainless steel pole to structure) .
- 1 x 32A DC circuit breaker.
- 2.5mm Cabtyre 3 core turbine power cable .
- Male and female insulated spade connectors for turbine Cabtyre power cable .
- steel ring connectors for controller power cable to lithium battery connection.
- 1 x copper earth spike .
- 15m 10mm turbine earth cable. Use 10mm stranded single core double Halogen solar power cable
- Chemical anchors for the 4 x M10 10mm stainless threaded bar . (buy enough for 2 x approx 15-20cm lengths )
- 10mm M10 stainless steel threaded bar and securing nuts .
Recommended compatible lithium batteries we sell for this kit : Our Pylontech US5000 lithium batteries . ( Listed under our batteries section of our online store for purchase ) .
Note : If installing on the wall of a fixed structure – i.e – free standing garage ; use 20mm round PVC pipe with stainless steel omega clamps to house your power cable – these can also be obtained from Hardware vendors .
If doing a ground install , bury your PVC pipe approx 25-30mm deep .
