Description
HIGH POWER DISCHARGE SYSTEM .
FEATURES AND SPECIFICATIONS :
- KODAK is your trusted household name for decades .
- BL3.6 rack mount Kodak Lithium Lifepo4 solar battery- 3.6 kWh capacity .
- EXPANDABLE STORAGE FOR THIS BATTERY : 15 batteries max in parallel = 54kWh
- Recommended battery DoD @ 80% @ 25°C = 6000+ cycles .
- Battery discharge current : high power for the serious home owner : 150A DC .
- Battery Charge current : 50A DC
- Kodak battery warranty : 10 years .
- Suitable for : Residential / lite commercial off grid .
- Battery compatible with our wind turbines for sale under our wind turbines section.
- Note : If connecting more than 1 battery in parallel , you will require to purchase our Veti DC busbar cabinet with integrated – and+ copper busbars – ( Due to this battery having an advantage of a high discharge rate , one must connect the inverter battery leads and all the Kodak battery leads directly to the busbars please ! ( MAX CURRENT ON YOUR BUSBAR MUST NOT EXCEDE 600A DC )
- Combine your batteries with our wind turbines with advanced lithium battery charge controller here : https://www.genesispowersystems.tech/product-category/solar-shop-products/wind-turbines/?orderby=price
- Add our Geyserwise advanced water heating system listed under our solar heaters section of our store which comprises out of a hybrid AC/DC geyser heating element , 2 x standard electrical PV solar panels and 1 x control unit = simply replace your existing geyser element with our H2O heating system .
NOTE : Please read all manuals below before installation :
- Warning ! ” Make sure you receive the correct battery to inverter BMS network cable that goes between your inverter and battery from our manufacturer and that it is correctly crimped on both ends – its colour coded according to your battery / and or inverters manual/s below – In addition ; make sure that it is plugged into the correct BMS port on the inverter and battery .This allows the inverter to safely charge/discharge your batteries and also keeps your warranties intact.
Watchpower for remote monitoring :
- Note : if using a pc/laptop (Windows or Linux) for WatchPower , connect to the KODAK inverters wifi module via the WatchPower program using your pc/laptops built in wifi .
- If you require to connect to your system across the internet – perform this same task but by using Anydesk to remote into your laptop/pc and access your WatchPower System through Anydesk (free program ) .I suggest you use a free vpn program when using anydesk .
- Download the Watchpower manual here : WatchPower user manual
- Note: all files and apps below are zipped using winzip -so unzip using winzip
- Download Watchpower program for laptop /PC here : installWatchPower_Windows 1.16SP9 Download Watchpower program for linux 64bit here : installWatchPower_Linux_64bit 1.16SP9Download Watchpower app for Android OS here : wifiapp-watchpowerDownload Watchpower app for Apple OS from your devices Apple app storeI store .
PLEASE NOTE :
All power systems/ and or related products , including our State of the Art Geyser Wise heating systems and wind turbines we sell must conform to all local wiring regulations and standards. Genesis Power Systems Pty Ltd will not be held liable for any product damage and /or failure that could arise due to systems that have not been installed in accordance with the Manufacturers prescribed install method/s .
Download manual here : BL3.6–manual
Download datasheet here : BL3.6–datasheet 20210928
Download battery parallel instructions here : Kodak BL Battery_parallel.doc
Download Kodak user settings here : Kodak inverter user settings guide
Download warranty here : BL3_6_kodak_lithium_battery_warranty
Application Note Firmware Update : Application Note – KODAK OG RANGE FIRMWARE UPDATE PROCEDURE .4 updated
Application Notes Kodak user settings : Kodak inverter user settings guide 1.1
